ARE YOU THROWING MORE THAN 50% OF YOUR STRETCH FILM OUT THE DOOR WITHOUT EVEN KNOWING IT?
- More than 75% of stretch wrap equipment we have tested is performing below acceptable levels, resulting in tens of thousands of dollars in wasted stretch film.
DID YOU KNOW THAT PROPER PRESTRETCHING OF THE FILM IS REQUIRED TO CHANGE THE STRETCH FILM PROPERTIES THAT CREATE THE FILM FORCE, FILM TENSION, AND FILM STRENGTH REQUIRED TO HOLD YOUR PRODUCT TOGETHER DURING SHIPPING?
- Without this, the stretch film cannot perform the task required.
HAVE YOU HAD TO INCREASE THE AMOUNT OF STRETCH FILM YOU APPLY TO THE LOAD TO HOLD IT TOGETHER BETTER WITHOUT KNOWING IT IS BECAUSE YOUR STRETCH WRAPPER HAS STOPPED PRESTRETCHING THE FILM?
- Just because a stretch wrap machine is running does not mean it is working. Although it might be applying stretch film to the load, that doesn’t mean it is prestretching the stretch film and creating all the properties in the stretch film required to hold your pallet together during transport.
IT ONLY TAKES 60 SECONDS
The following guide provides a quick test of your prestretch performance. Although there are applications where low prestretch levels may have some benefit (empty PET bottles), the vast majority of applications should have a minimum of 170% Prestretch.
By simply weighing the stretch film applied and counting the number of revolutions we can determine the level of prestretch provided by the stretch wrapper. Although an estimate, the result allows you to quickly determine if a problem exists on your stretch wrapper.
PLUG IN YOUR NUMBERS AND SEE IF YOUR MACHINE IS WORKING PROPERLY